SUPER8OPNDD-NB

SUPER8OPNDD-NB
SUPER8OPNDD-NB

Linear Bearing, Ball Bushing only, Super, 0.5 in, Open, Self-aligning, Adjustable, Nylon Balls, Integral Seals both ends; Use with 0.5 in Diameter Class L Shaft in continuously supported applications


  • The Super Ball Bushing Bearing has been the industry standard for self-aligning linear bearings for over twenty years.
  • Besides the dramatic increase in load capacity, the Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction.
  • The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
  • Radially floating bearing plates. When installed in an adjustable housing, the Super Ball Bushing Bearing may be adjusted to a specific diametrical fit-up for accurate and repeatable movement.
  • For use with L class, continuously supported shafting.

Wymiary

WymiarWartość
[d] Shaft, Nominal Diameter0.5 in
[Alpha]30 °
[C] Length Along Axis1.460 / 1.500 in 
[C1]1.012 / 1.032 in 
[C2] Min0.05 in
[D] Housing Bore recomended for Adjustable housing0.8750 / 0.8760 in 
[D] Recommended Housing Bore0.8750 / 0.8755 in 
[D], Nominal0.875 in
[E]0.31 in
[F] Retention Hole Dia0.14 in
[G]0.75 in

Specyfikacje

SpecyfikacjeWartość
Adjustable/Not AdjustableAdjustable 
Closed/OpenOpen 
MaterialSteel; Plastic 
Number of Ball Circuits
Nylon Ball or Alternating Nylon BallNylon Balls 
Self AlignmentSelf-aligning 
Temperature Max185 °F
Use with shafting ClassClass L 
Weight0.03 lb
Wipers, SealsIntegral Seals both ends 

Parametry

performance graphic
performance graphic
performance graphic
ParametryWartość
Load Capacity, Dynamic23 lbf

Uzyskaj wycenę

* Wpisz dane poniżej, abyśmy mogli udzielić pomocy:

Would you like to receive periodic Thomson email updates including application stories, online training opportunities, new product information and links to online design tools?