SUPER10OPNNBCR
Can't find what you're looking for? Go to the Product Selector
Linear Bearing, Ball Bushing only, Super, 0.625 in, Ouvert, Alignement automatique, Ajustable, Billes en nylon (NBA), Anticorrosion (CR); Utiliser avec 0.625 in Diameter Classe L Arbre pour applications prises en charge en continu
Lead Time:
10 Days
- The Super Ball Bushing Bearing has been the industry standard for self-aligning linear bearings for over twenty years.
- Besides the dramatic increase in load capacity, the Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction.
- The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
- Radially floating bearing plates. When installed in an adjustable housing, the Super Ball Bushing Bearing may be adjusted to a specific diametrical fit-up for accurate and repeatable movement.
- For use with L class, continuously supported shafting.
| Dimension | Valeur |
|---|---|
| [Alpha] Angle | 30 ° |
| [C] Longueur le long de l'axe | 1.480 / 1.500 in |
| [C1] | 1.095 / 1.105 in |
| [C2] Min. | 0.056 in |
| [d] Arbre, diamètre nominal | 0.625 in |
| [D] Housing Bore recomended for Adjustable housing | 1.1250 / 1.1260 in |
| [D] Recommended Housing Bore | 1.1250 / 1.1255 in |
| [D], Nominal | 1.125 in |
| [E] | 0.37 in |
| [F] Trou de rétention | 0.11 in |
| [G] | 0.13 in |
| Performance | Valeur |
|---|---|
| Capacité de charge, dynamique | 32 lbf |
