LSRA10
Can't find what you're looking for? Go to the Product Selector
Shaft Support, Continuous Support Assembly, Profil bas, Pré-percé (PD), Classe L, Steel, Découpe à la longueur (CTL), 202 in Long, Utiliser avec 0.625 in Nominal Diameter Open Bushing Bearings
Lead Time:
Contact Factory
- Shaft supports simplify mounting of Thomson 60 Case shafts. Users of Thomson 60 Case shafting should consider the use of these shaft supports
- These supports can be used horizontally or vertically.
- Low Shaft Rails allow the design of more compact linear motion systems
- Class L 60 Case Shaft included
- Y1=Y2 is standard. Special Y1 can be specified by customer.
- Bolt down from top
- Consists of black oxide steel rail and high carbon steel LinearRace shafting (HRC 60 min.).
- LSRAs do not use standard “PD” shafting. The shafting uses a different hole pattern and configuration
- Use only with Super Smart Ball bushing bearings.
| Dimension | Valeur |
|---|---|
| [A] | 0.45 in |
| [A1] | 0.225 in |
| [A2] | 0.31 in |
| [d] Arbre, diamètre nominal | 0.625 in |
| [H] | 0.687 in |
| [H] Tolérance | ± 0.002 in |
| [H1] | 0.41 in |
| [N] | 0.141 thru, 0.228 Dia C-Bore x 0.350 Deep |
| [X] Dim. | 2 in |
| [Y] | 1 in |
| Boulon recommandé | #5 |
| Longueur | 202 in |
