WM8 - Producto obsoleto
Producto WM8 ahora es un artículo obsoleto.
Can't find what you're looking for? Go to the Product Selector
Shaft Support, Soporte intermitente, Waymount, Usar con 0.5 in Eje de diámetro, Obsoleto
- Designed for use with Roundway bearings. Two or more can be used to provide intermittent support and adjustment along the length of the shaft. Unlike shaft support rails, Waymount supports do not permit longitudinal passage of open-type Ball Bushing bearings. When it is necessary to travel over Waymount supports, Roundway bearings should be used.
- Base bolt [F] to be supplied by customer
- Shaft-attaching bolt [G] & washer supplied with Waymount support
| Unidad | Valor |
|---|---|
| [A] | 0.5 in |
| [B] | 0.875 in |
| [C] | 0.25 in |
| [E] | 0.75 in |
| [F] | 0.22 in |
| [G] | 8-32 bolt and washer |
| [H] | 1.06 in |
| [L] | 1.5 in |
| [M] | 0.69 in |
| [N] | 0.5 in |
| [P] | 0.44 in |
| [W] | 1.75 in |
| Ajuste total [J] | 3/64 in |
| Ajuste total [K] | 3/32 in |
| Diámetro nominal, eje [d] | 0.5 in |
