Skip to content Skip to navigation
MLSM80Z (FORCELINE) Linear Units

MLSM80Z (FORCELINE) Linear Units

FORCELINE MLSM80Z positioning slide is designed with the extremely fast SPEEDLine® guidance system.With its successful patented plastic cover band, these units can be installed in just about any direction. The surface of the unit's power bridge is designed with T-slots on similar spacing allowing easy X-Y assembly of gantry or Cartesian systems.

Overview

MLSM80Z Specifications:

Specifications / Shaft Size MLSM80Z
Profile size (w x h): mm (in) 240 x 85 (9.5 x 3.4)
Type of Belt: 75 ATL 10
Max Stroke Length: mm (in) 5900 (232)
Max Linear Speed: m/s (in/s) 5 (197)
Max Acceleration: m/s2, in/s2 20 (787)
Repeatability: ± mm (in) 0.05 (0.002)
Max Input Speed: rpm (rev/s) 1500 (25)
Operating Temperature: °C (°F) 0 to 80 (32 to 176)
Max Dynamic Load (Fx): N (lbf) 5000 (1124)
Max Dynamic Load (Fy): N (lbf)
complete unit
6400 (1439)
Max Dynamic Load (Fz): N (lbf)
complete unit
6400 (1439)
Max Dynamic Torque (Mx): Nm (lbf-in)
complete unit
600 (5311)
Max Dynamic Torque (My): Nm (lbf-in)
complete unit
720 (6373)
Max Dynamic Torque (Mz): Nm (lbf-in) 720 (6373)
Max Drive Shaft Force: N (lbf) 700 (157)
Max Drive Shaft Torque: Nm (lbf-in) 150 (1328)
Pulley Diameter: mm (in) 63.66 (2.51)
Stroke per Shaft Revolution: mm (in) 200 (7.9)
 Weight: kg (lb)
unit with zero stroke
every 100 mm of stroke
each carriage
 
30.8 (67.9)
2.2 (4.85)
9.6 (21.2)

MLSM80Z Feature Highlights:

  • Four mounting clamps included
  • Adjustable belt tensioning
  • Central lubrication design
  • Double carriages

Find a Product

Family

Drive Type

Guide Type

Repeatability

Nut Type

Stroke

mmmm

Travel per Revolution

Carriage

Protection

Shaft Orientation

Shaft Quantity

Left Side (angle), First End (inline)

Right side (angle), Other end (inline)

CAD Models

  • Configurable 2D/3D Partstream Models
  • Configurable 2D/3D Solidcomponents Models
  • Configurable 2D/3D PartServer Models
  • Static 2D/3D Model file downloads

NOTE: Please use Internet Explorer 11, Edge, Firefox, or Google Chrome with Edrawings Viewer

Partstream Interactive Viewer Instructions:
1) Select a product from the table below and Configure your model to the right of the viewer that appears.
2) Click the Create button at the bottom of the configurator and wait for model to load (may take a few minutes).
3) Click the Download tab and login to your account if requested (or register as a first-time user).
4) Select a format, wait for the file to be created (may take a few minutes), and click the Download button.

WLSM ForceLine Linear Motion Systems
back to top