Skip to content Skip to navigation
MLSH60Z (FORCELINE) Linear Units

MLSH60Z (FORCELINE) Linear Units

Thomson's (FORCELINE) MLSH60Z positioning slides are designed with the extremely fast SPEEDLine® guidance system.  With its successful patented plastic cover band, these units can be installed in just about any direction.  The surface of the unit's power bridge is designed with T-slots on similar spacing allowing easy X-Y assembly of gantry or Cartesian systems.

Overview

MLSH60Z Specifications:

Specifications / Shaft Size MLSH60Z
Profile size (w x h): mm (in) 160 x 65 (6.3 x 2.6)
Type of belt  32ATL5
Max Stroke Length: mm (in) 5500 (217)
Max Linear Speed: m/s (in/s) 6.5 (256)
Max Acceleration: m/s2 (in/s2) 40 (1575)
Repeatability: ± mm (in) 0.05 (0.002)
 Max Input Speed: rpm  3000
Operation Temperature Limits: °C (°F)  0 to 80 (32 to 176)
Max Dynamic Load (Fx): N (lbf) 1480 (333)
Max Dynamic Load (Fy): N (lbf) 3000 (674)
Max Dynamic Load (Fz): N (lbf) 3000 (674)
Max Dynamic Torque (Mx): Nm (lbf-in) 165 (1460)
Max Dynamic Torque (My): Nm (lbf-in) 310 (2744)
Max Dynamic Torque (Mz): Nm (lbf-in) 310 (2744)
Max Drive Shaft torque (Mta): Nm (lbf-in)  45 (398.3)
Pulley diameter: mm (in)  42.97 (1.69)
 Stroke per shaft revolution: mm (in)  135 (5.32)
Weight: kg (lb) 
unit with zero stroke
every 100 mm of stroke
each carriage
 
12.6 (27.8)
1.33 (2.9)
3.9 (8.6)

MLSH60Z Feature Highlights:

  • Can be installed in all directions
  • Patented guide system
  • Patented plastic cover band
  • Patented screw support system
  • Screw supports included in all units as required
  • Central lubrication of all parts as needed
  • 4 x mounting clamps included
  • Double carriages

Find a Product

Family

Drive Type

Guide Type

Repeatability

Nut Type

Stroke

mmmm

Travel per Revolution

Carriage

Protection

Shaft Orientation

Shaft Quantity

Left Side (angle), First End (inline)

Right side (angle), Other end (inline)

CAD Models

  • Configurable 2D/3D Partstream Models
  • Configurable 2D/3D Solidcomponents Models
  • Configurable 2D/3D PartServer Models
  • Static 2D/3D Model file downloads

NOTE: Please use Internet Explorer 11, Edge, Firefox, or Google Chrome with Edrawings Viewer

Partstream Interactive Viewer Instructions:
1) Select a product from the table below and Configure your model to the right of the viewer that appears.
2) Click the Create button at the bottom of the configurator and wait for model to load (may take a few minutes).
3) Click the Download tab and login to your account if requested (or register as a first-time user).
4) Select a format, wait for the file to be created (may take a few minutes), and click the Download button.

MLSH ForceLine Linear Motion Systems
back to top